Skip to guide

Hey Sage · Google Ads

Google Ads location targeting: radius, postcodes and the Presence setting that decides who sees your ads

Where your ads show is decided by two settings, not one: the places you target and the location option underneath them. Here is how we set both for Australian service businesses and online stores, and how to check what you actually paid for.

7 to 9 min read Step-by-step Updated November 2026
On this page
  1. 01 · How Google Ads location targeting works
  2. 02 · Presence or Presence or interest: which to choose
  3. 03 · Radius, postcodes or council areas
  4. 04 · Worked example: what the default costs a local business
  5. 05 · Location bid adjustments and Smart Bidding
  6. 06 · Check where your ads really showed
  7. 07 · When location targeting is not working
  8. 08 · Questions we get about Google Ads location targeting
  9. 09 · Sources

How Google Ads location targeting works

Location targeting tells Google where your ads may show. You can target a country, a state, a city or suburb, a postcode, a council area, or a radius around an address, and you can exclude any of those. That is the first half.

The second half is the location option under the targets. Google's default, Presence or interest, shows your ads to people who are in or regularly in your area and to people elsewhere who have shown interest in it. Presence limits ads to people who are in or regularly in the area. If you run a local service, most out-of-area clicks we find in new accounts come from leaving this on the default.

Google works out location from signals such as account settings, the device and behaviour on Google's services, and calls the result its best effort. Expect a small share of clicks from just outside any boundary you draw, and judge the setting by the report, not the map.

Presence or Presence or interest: which to choose

Google recommends Presence or interest on Search and says advertisers in travel, real estate and education who switched to it saw more conversions. That makes sense for businesses whose customers plan from somewhere else: a holiday rental on the Sunshine Coast wants the Sydney family searching for it. It makes less sense when you can only serve people who are physically there.

Your businessLocation option we useWhy
Trades, clinics, salons, local servicesPresenceSomeone in Perth searching "electrician Geelong" is rarely your customer
Online store shipping Australia widePresenceWith Australia targeted, Presence or interest can reach people overseas who search about Australia
Tourism, accommodation, venuesPresence or interestCustomers search from where they live, before they travel
Real estate, education, relocationPresence or interest, checked monthlyBuyers and students often search from another city

Exclusions always work on Presence: an excluded area blocks people who are likely to be in it. Search, Display, Shopping, Performance Max and Demand Gen campaigns all let you choose between the two targeting options. Hotel campaigns use Presence only.

To change it, open the campaign's Settings, expand Locations, then Location options, and pick "Presence: People in or regularly in your included locations". Save the section and the page.

Run Better Ads. The free guide + vault.

137 pages on ecommerce ads, with 46 real ads and 17 landing pages taken apart.

Get the free guide

Radius, postcodes or council areas

Google's location list for Australia, as published for the Google Ads API in October 2026, has 8 states and territories, 2,947 cities, towns and suburbs, 2,540 postcodes, 225 council areas (Google calls them municipalities) and 50 city regions. That is enough to draw almost any service area without a circle.

MethodBest forWatch out for
RadiusA quick start around one address; regional townsCircles cross water and boundaries. A 20 km radius around Frankston takes in the Mornington Peninsula and the bay; around St Kilda it reaches suburbs you may not drive to
PostcodesMatching a delivery or service zone you already price by postcodeRural postcodes can be huge. Add them in bulk, up to 1,000 at a time
Council areasMetro service businesses that work a set of councilsNames differ from suburb names; check the outline on the map before saving
StatesOnline stores with state shipping rules; businesses licensed in one statePresence still matters for the people visiting from elsewhere

The smallest radius Google allows is 1 km, and Google only accepts targets above minimum area and user thresholds, so tiny radii show ads intermittently or not at all. A campaign can hold 10,500 location targets (up to 10,000 individual and 500 radius targets), counting targets and exclusions together.

To add a radius: in Settings, expand Locations, choose Enter another location, then Advanced search. Pick Radius, enter the address, set the distance and unit, then save. For postcodes or council areas, use the same Advanced search, tick Add locations in bulk, paste your list and restrict the search to Australia so "Richmond" does not match the one in London.

If you take calls, a tight service area also makes call conversion tracking more honest, because fewer of the calls you count come from people you cannot serve.

Worked example: what the default costs a local business

An invented example with round numbers. A plumbing business in Melbourne's inner north spends A$3,000 a month on a Search campaign targeting a 15 km radius, with Presence or interest left on. Its average cost per click is A$6, so it buys 500 clicks.

  1. The Matched locations report shows 90 of those clicks came from outside the service area: regional Victoria, Sydney, and two from overseas. 90 clicks at A$6 is A$540 a month.
  2. Those 90 clicks produced 2 enquiries, both out of area. That is A$270 per enquiry the business cannot take.
  3. Inside the area, the campaign converts 10% of clicks into enquiries, so A$60 per enquiry.
  4. Switching to Presence and replacing the circle with the seven council areas the team actually works moves that A$540 to in-area clicks. At the same cost per click and conversion rate, that is 90 more in-area clicks and about 9 more enquiries a month it can serve.

Your numbers will differ, which is the point of reading the report before changing anything. Use our Google Ads cost guide for Australia to sense-check your cost per click, and the paid media budget planner to work out what an enquiry is worth before you decide how tight to go.

Location bid adjustments and Smart Bidding

A location bid adjustment raises or lowers bids for one area, from minus 90% to plus 900%. It only works with manual bidding and Target impression share. Under Target CPA, Target ROAS, Maximise conversions and Maximise conversion value, Google does not apply location adjustments, and Performance Max does not support them at all. Smart Bidding already uses location as a signal.

So when one area is worth more to you, we use one of three levers instead:

  • Exclude areas that never pay. Exclusions apply under every bid strategy, and an exclusion wins over a target: exclude a council area inside your radius and ads stop there.
  • Split the valuable area into its own campaign with its own budget and target, when it has enough conversions to bid on. Our Google Ads account structure guide covers when a split is worth the thinner data.
  • Feed it value. If jobs in some suburbs are worth more, send that value back with your conversions, so value-based bidding learns it.

Check where your ads really showed

Open Insights and reports, then When and where ads showed, and the Locations report. It has two views:

  • Targeted locations shows results by the places you targeted.
  • Matched locations shows results by the place each ad was matched to, which can be where the person was or the place they searched about.

Sort Matched locations by cost and look for areas you do not serve. If they add up to more than a few percent of spend, switch to Presence or add exclusions. With location assets linked from your Business Profile, the Distance report on Search and Shopping campaigns also shows results by how far the person was from your nearest location, which is the clearest way to choose a radius from evidence.

If your ads seem not to show where you are, remember that searching for your own ad from outside the target area will never find it, and repeated searching of your own ad can stop it showing to you. Use the Ad Preview and Diagnosis tool instead. Checking how the ad itself reads? Our Google Ads preview tool shows the layout before it goes live.

When location targeting is not working

  • Clicks from other states or overseas: the location option is on Presence or interest. Switch to Presence.
  • Ads not showing in a small town: the radius or postcode may sit below Google's privacy threshold. Widen it or target the council area.
  • Leads from the wrong Richmond, Springfield or Newcastle: a bulk list matched another country or state. Check every target's outline on the map.
  • Language mismatch: keep language targeting consistent with the area; for Australia that is usually English.
  • An excluded area still in the report: location is a best effort, and Matched locations can show the place searched about rather than where the person stood. A trickle is normal; a steady stream means a setting is wrong.

If you would rather hand the setup and the monthly location check to someone who does it every week, that is part of how we run Google Ads for Australian businesses.

Questions we get about Google Ads location targeting

What is the minimum radius in Google Ads?

1 km. Google also requires every target to meet minimum area and user thresholds, so very small radii can show ads intermittently or not at all. In a small town, target the council area or postcode instead.

Should I use Presence or Presence or interest?

Use Presence when you can only serve people who are in the area, which covers most trades, clinics and online stores shipping within Australia. Use Presence or interest when customers search from elsewhere before they arrive, such as tourism and accommodation.

Can I target postcodes in Google Ads in Australia?

Yes. Google lists 2,540 Australian postcodes you can target or exclude, plus suburbs, council areas and states. Add them in bulk through Advanced search, up to 1,000 at a time, restricted to Australia.

Do location bid adjustments work with Smart Bidding?

No. Target CPA, Target ROAS, Maximise conversions and Maximise conversion value do not apply location bid adjustments, and Performance Max does not support them. Use exclusions or a separate campaign for an area that is worth more.

How many locations can one Google Ads campaign target?

10,500 location targets per campaign: up to 10,000 individual locations and 500 radius targets, with targeted and excluded locations counted together.

Why can't I see my own ad when I search?

If you are outside the target area, your ad will not show to you. Use the Ad Preview and Diagnosis tool to see the ad as someone in the area would, without adding impressions.

Sources

↑